Description
Standard probes for oscilloscopes. Different models available.
1. BNC to Alligator Crocodile Clip
- Cable External Diameter: Φ4. 0mm
- Conductor External Diameter: Φ3. 0mm
- Maximum input voltage: AC ~ 500Vpck DC ~ 250V
- Cable Impedance: 50 Ohm
- Interface Needles: BNC
- Total length: 100 cm
- Plug Total Length: 44 mm
- Relative humidity: less than 85%
- Color: Black + Red
- Materials: PVC
Packing Content
- 1 x BNC to 2 Crocodile Clip Oscilloscope Test Probe Leads (1m)
2. Hantek Probes (dismissed)
● Attenuation ratio: x1× and x10 selectable with switch.
● Suitable for intermediate and low frequency signals.
● Adjusting tool: adjusts probe compensation to assure the match with the oscilloscope (for x10 range).
● 12cm GND wire with alligator clip
● 4 pairs of colored cable markers
| Item | PP-80 | PP-90 | PP-150
PP-150B |
PP-200 PP-200B |
| Attenuation | x1 x10 | |||
| Input resistance | 1MΩ: 10MΩ | |||
| Input capacitance | x1: 85pF-115pF x10:18.5pF-22.5pF |
x1: 85pF-115pF x10: 18.5pF-22.5pF |
||
| Compensation scope | 20pF-40pF | 15pF-40pF | 15pF-35pF | |
| System bandwidth | x1:DC-6MHz; x10: DC-60MHz |
x1:DC-6MHz; x10: DC-80MHz |
x1: DC-6MHz x10: DC-100MHz |
x1: DC-6MHz x10: DC-200MHz |
| Input voltage | x1:<200V DC +Peak AC x10: <600V DC +Peak AC |
|||
| weight | 55g | |||
| Cable length | 120cm | |||
| Temperature scope: | Operation: -10℃–+50℃ Not Operation: -20℃–+75℃ |
|||
| Humidity | ≤85% (Relative humidity) | |||
3. P6100 Probes
● Attenuation ratio: x1× and x10 selectable with switch.
● Suitable for intermediate and low frequency signals.
● Adjusting tool: adjusts probe compensation to assure the match with the oscilloscope (for x10 range).
● 1.2m cable
● 4 pairs of colored cable markers
Packing Content
- 2 x P6100 Probe
