Description
Features
- 3-axis XYZ acceleration data
- Accurate range: ±16g with 16bit resolution
- Max vibration frequency: 50Hz (at max rate)
- Sampling rate: 50 – 200 Sa/s oversampled to 500 – 2000 Sa/s (it requires BLE 5.0 phones to run at full rate, otherwise max rate is 50Sa/s)
- Bluetooth coverage range: < 50 meters (without obstacles)
- low consumption Bluetooth 5.0 (battery life < 8 hours)
- Supported by HScope (just acceleration data) – license provided on purchase
How to Use
Don’t need to pair this device in Android, just keep Bluetooth on.
- Enable Bluetooth in HScope Settings → Oscilloscope section (authorize HScope to use Location service and enable also Location service in the Tablet/Phone)
- Press the WIT button for about 3 secs to power it on (first open HScope app and then turn on the WIT device)
- When the LED blink fast it is waiting for connection, after it is connected it blinks slow
- Press the WIT button for about 3 secs to power it off
- Charge only with a 5V USB port (not fast charger)
In the Packaging
- x1 WT9011DCL BLE 5.0 sensor with USB Type-C interface
- x1 Type-C short Data & Charging Cable
